LETTERS & LOGOS

Dimensional letters and logos for direct installation onto walls or as part of larger signage assemblies. Available in plastic, laminated assemblies and metal. Don’t see what you are looking for? We have no minimum order requirements and we are never too busy to help. Phone us at 604-294-6288 or email our signage department directly at signsales@geohewitt.com

PLASTIC: Flat cut acrylic for indoor or outdoor applications.

1/8″ to 1-1/2″ thick in single piece heights from 1″ to 72″. Available in 45 standard colours or can be painted in any custom colour. Dimensional Plastic Injection Molded Letters are also available with prismatic or rounded faces for a 3 dimensional look.

LAMINATED: Flat cut acrylic or foam, laminated with either .030″ thick metal faces or 1/8″ thick acrylic faces for indoor applications only.

(Acrylic) 1/8″ to 1-1/2″ thick in single piece heights from 3″ to 48″. (Foam) 1/2″ to 3″ thick in single piece heights from 2″ to 24″. 15 standard metal face finishes.
45 standard acrylic face colours or can be painted in any custom colour. For letters & logos with metal faces, the sides of the letters or logo can be painted in any standard colour to compliment or accent the face.

METAL: Flat cut metal for indoor or outdoor applications.

Aluminum: 1/8″ to 1″ thick in letter heights from 1″ to 46″. Can be supplied with a horizontal or vertical brushed finish, one of 7 anodized finishes or can be painted in one of 45 standard or any custom colour.

#304 or #316 Stainless Steel: 1/8″ to 1/2″ thick in letter heights from 1″ to 46″. Can be supplied with a horizontal or vertical brushed finish. Polished finish also available. #304 Satainless Steel will work suitably for all interior and most exterior applications. #316 Stainless Steel contains the addition of molybdenum, an alloy which drastically enhances corrosion resistance, especially for more saline exposed environments. #316 Stainless Steel is more expensive than #304 Stainless Steel however, if your application is intended to be an exterior application near an Ocean than we highly recommend this type of Stainless Steel to maximize the longevity of your investment.

Brass: 1/8″ to 3/4″ thick in letter heights from 1″ to 30″. Can be supplied with a horizontal or vertical brushed finish. Polished finish, light, regular or dark oxidized finish also available.

Bronze: 1/8″ to 1/2″ thick in letter heights from 1″ to 46″. Can be supplied with a horizontal or vertical brushed finish. Polished finish, light, regular or dark oxidized finish and traditional or turquoise patina finish also available.

Copper: 1/8″ to 3/8″ thick in letter heights from 1″ to 40″. Can be supplied with a horizontal or vertical brushed finish. Polished finish, light, regular or dark oxidized finish also available.

Corten Steel: 1/8″ to 1/4″ thick in letter heights from 1″ to 46″. Corten steel is designed to naturally oxidize (rust). After fabrication and left to the elements the Corten steel will rust, similar to regular mild steels. The difference is the composition of Corten steel allows it to keep its strength only forming rust on the outer layer. This thin layer of rust will then go through the patina process until cured. The patina process will change the colour and tones of the material over a 6 to 10-week period outdoors. During this period, rust run off is present (rust drips). Once cured the material will continue to evolve with the environment for years to come without losing any strength!

Cast: Cast aluminum and cast bronze metal letters are also available with prismatic faces for a 3 dimensional look.

Hewitt's Letters & Logos
Hewitt's Standard Fonts