HEWCO LUMBER & INDUSTRIAL INKS
Hewco Wetsurf Lumber Marking Ink: For automatic grading or hand-stamping on wet, green or dry lumber. Waterproof, sun-proof, quick-drying, ideal for sub-zero conditions. Available in one-gallon containers. Black colour and thinner.
Hewco Roto Flow Ink: Compatible with all grade printing equipment using neoprene feed rolls. High viscosity means longer life than traditional grading inks. Low fade due to UV exposure. Completely water resistant. Used extensively in lumber and sheathing plants. APA Certified Grading Ink (blue and black). Stock colours (available in 1-, 5-, 45-gallon and tote containers) are black, blue, red and green.
Hewco Roller Stencil Ink: For stenciling use on dry wood with foam stencil rollers. Waterproof. Stock colours (available in 1-gallon container) are red and blue.
Hewco F200 MSR Ink: To identify MSR lumber, compatible with all spray systems, can also be used as a Moisture Meter Ink in plywood applications. Supplied in concentrate, also available in a powder concentrate. Low PH, negligible corrosive, non-disappearing. Stock colours (available in 1- and 5-gallon containers) are black, green, red, blue, violet, orange and yellow.
Hewco Houdini (Disappearing) Moisture Meter Ink: To identify moisture content in lumber and plywood, compatible with all spray systems. Stock colours (available in 5-gallon containers) are red and blue.
Hewco Pulp Bale Marking Ink: For the stenciling of markings on bales of pulp. FD&C approved, 100% re-pulpable. Stock colours (available in 1-gallon containers) are black, red, blue and green.
Hewco Block-Out Pulp Bale Marking Ink: For blocking-out or covering previously stenciled marks on bales of pulp. FD&C approved, 100% re-pulpable. Stock colours (available in 1- and 5-gallon containers) are blue and red.
MARSH ROLMARK INK
Specially formulated to meet the most stringent quality control standards for all applications. Waterproof, permanent, and fast drying on most surfaces. Marks on porous or non-porous surfaces. Can be used to make clear legible marks with the Marsh Fountain Brush, Fountain Roller, RM20 Roller with RM50 Pad and standard spray gun. Use Marsh Rolmark Solvent for cleanup. Available in black, blue, green, orange, red, white and yellow. Available in 1 quart (.95L) and 1 gallon (3.8L). Colours meet government performance specification CID A-A-208B.
PORELON HP INK ROLLS
Porelon HP Ink Rolls are available in 4″ O.D. x 3″ I.D. (by your specific length) and 2.5″ O.D. x 1″ I.D. (by your specific length) in all colours. These proprietary high performance oil-based, ink-impregnated gel rolls are considered to be the standard of performance for ink rolls. Custom sizes and special product types such as quick dry are also available by special order. Our Porelon HP ink rolls will fit Globe Burelbach, Claussen All-Mark, Irvington, Timberstar as well as other makes of equipment.
HEWCO HP (ROLL-MAX) INK ROLLS
Hewco HP (Roll-Max) Ink Rolls are available in 4″ O.D. x 3″ I.D. (by your specific length) in black, red, green and blue. The ink formulation and performance of these ink rolls are APA-Certified. Quality Control Managers at mills at several locations throughout North America have extensively tested these new ink rolls for us and have determined that these ink rolls perform as well as or better than Claussen All-Mark Brand High Performance Rolls. It has also been determined that these new ink rolls can achieve an approximate 20% longer life and are (depending on the quantity ordered) on average 20% less expensive then any other ink roll. Our Hewco HP (Roll-Max) ink rolls will fit Globe Burelbach, Claussen All-Mark, Irvington, Timberstar as well as other makes of equipment.
DRY INK ROLLS
Type DR100 Latex (fits Timberstar) 4 1/4″ outside diameter x 2 1/8″ inside diameter x 1″ face.
Type HE103-6-N Neoprene 2 1/2″ outside diameter x 1″ inside diameter x 3″ face. Custom sizes also available.
Type HE100-2 High Performance ink rolls for Timberstar grade printers.
Any other custom size and type which you may require is available as a custom order.
TREE & LOG MARKING PAINTS
Hydra Bond. A highly specialized marking paint for the forest industry. Just as the name indicates, Hydra Bond was developed specifically for use during adverse weather conditions or when marking wet wood. Hydra Bond’s exclusive formula gives unequalled performance under severe, uncompromising weather and handling situations. It even penetrates through thin layers of ice, snow and slime.
Hi-Vis Fluorescent Marking. The ultimate in super high visibility marking! Hi-Vis Fluorescent Marking aerosols give the results you need. Six vibrant fluorescent colours designed for short-term marking of trees, logs or lumber. With Hi-Vis, you will create a strong visual impact and attract attention at greater distances.