CONTINUOUS CONTACT MARKING

HEWCO HC-200 (DUNNAGE-MAX) GRADE PRINTERS

High-speed, full-length grade printing at the out-feed of your planer, notcher or other moulding machine.

Can be mounted to grade print linear or transverse traveling pieces. Pressurized inking system delivers continuous ink for consistent grade printing. No changing of pre-charged inking rolls. Low operating and maintenance cost.

HEWCO HC-200-L (LUMBER-MAX) GRADE PRINTERS

High-speed, full-face grade printing, top or bottom mounted before your stacker. Prints a single grade continuously.

Pressurized inking system delivers continuous ink for consistent grade printing. No changing of pre-charged inking rolls. Low operating and maintenance cost.

For additional information, please contact our Forestry and Industrial Sales Representative, Jeffery Mahe directly at 604-727-0707, in the office at 604-294-6288 or by email to jmahe@geohewitt.com

HEWCO CUSTOM CONTACT MARKING GRADE PRINTERS

Up to 28 position grade printer, free rotating or indexing, solid inking or liquid inking system, PLC controlled, adjustable base, line speeds up to 600ft per minute, continuous grade stamp ring dies or Velcro backed dies.

For additional information, please contact our Forestry and Industrial Sales Representative, Jeffery Mahe directly at 604-727-0707, in the office at 604-294-6288 or by email to jmahe@geohewitt.com

HEWCO NON SELF-INKING HAND ROLLERS

A hardwood drum and handle, mounted to an aluminum frame with aluminum shaft and end caps. Available with a standard 2.5″ (63.5mm) diameter drum in widths of 3 – 10″ (76 – 254mm) or standard 3.5″ (89mm) diameter drum in widths of 1-1/2 – 4″ (38 – 101.5mm).

A deep profile custom vulcanized rubber die with your specific information is applied to the drum providing for a continual roll stamp. Rubber dies are available in different rubber compounds and densities.

Use with one of our industrial stamp pads.

For additional information, please contact our Forestry and Industrial Sales Representative, Jeffery Mahe directly at 604-727-0707, in the office at 604-294-6288 or by email to jmahe@geohewitt.com

HEWCO SELF-INKING HAND ROLLERS

A hardwood drum and handle, mounted to an aluminum frame with aluminum shaft, aluminum ink roll shaft with polyethelene sleeve and aluminum end caps. Available with a standard 2.5″ (63.5mm) diameter drum in widths of 3 – 8″ (76 – 203mm) or standard 3.5″ (89mm) diameter drum in widths of 1-1/2 – 4″ (38 – 101.5mm).

A deep profile custom vulcanized rubber die with your specific information is applied to the drum providing for a continual roll stamp. Rubber dies are available in different rubber compounds and densities.

Use with one of our dry or pre-charged inking rolls.

For additional information, please contact our Forestry and Industrial Sales Representative, Jeffery Mahe directly at 604-727-0707, in the office at 604-294-6288 or by email to jmahe@geohewitt.com